Showing posts with label pfsense. Show all posts
Showing posts with label pfsense. Show all posts
Tuesday, July 5, 2011
Thursday, June 30, 2011
Serial Console Cable
I'm going to be doing a majority of the setup for my PFSense box using my Mac. The PFSense box will have a DB9 serial connector which is what will be used for most of the initial setup. In order to get it going, I will need the following:
If you've been doing a lot of system administration work, you may already have MacPorts setup. If not, then get that installed. Once you do have it installed, it should be as simple as:
sudo port install minicom
This will take a while as it also has to download/compile/install perl.
For the hardware installation, I ordered the following from Amazon:
EDIT: It appears that with newer versions of OS X, a different driver is required to get the TRENDnet USB to Serial Converter TU-S9 working correctly. A driver from Prolific Technology for the PL-2303 is required. It can be downloaded at:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=229&pcid=41
- minicom installed (I'm sure you can use something else, but I'm going with this)
- usb <-> db9 connector
- null modem cable
If you've been doing a lot of system administration work, you may already have MacPorts setup. If not, then get that installed. Once you do have it installed, it should be as simple as:
sudo port install minicom
This will take a while as it also has to download/compile/install perl.
For the hardware installation, I ordered the following from Amazon:
Once everything is connected up, I should be able to connect up to the PFSense box with just the following command:
minicom -b 9600
EDIT: It appears that with newer versions of OS X, a different driver is required to get the TRENDnet USB to Serial Converter TU-S9 working correctly. A driver from Prolific Technology for the PL-2303 is required. It can be downloaded at:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=229&pcid=41
PFSense hardware order
I'm in the process of setting up a new office router. As I've done at a previous place, I'm opt'ing to build out a PFsense box. For the hardware, I've ordered an ALIX kit from Netgate.
http://store.netgate.com/ALIX2D3-2D13-Kit-Red-Unassembled-P174.aspx
Essentially, it's a single board computer with a flash drive. The kit comes unassembled with the following:
- ALIX system board with 3 ethernet ports, DB9 serial port, dual usb port
- enclosure
- CF card
- power supply
Assembly for the whole system is pretty easy and should just require a phillips head screwdriver.
http://store.netgate.com/ALIX2D3-2D13-Kit-Red-Unassembled-P174.aspx
Essentially, it's a single board computer with a flash drive. The kit comes unassembled with the following:
- ALIX system board with 3 ethernet ports, DB9 serial port, dual usb port
- enclosure
- CF card
- power supply
Assembly for the whole system is pretty easy and should just require a phillips head screwdriver.
Subscribe to:
Posts (Atom)