Minicom updated configuration

My minicom configuration is:

cat /opt/local/etc/minirc.dfl


# Machine-generated file - use "minicom -s" to change parameters.
pu port             /dev/tty.usbserial
pu baudrate         9600
pu bits             8
pu parity           N
pu stopbits         1

Serial Console Cable

I'm going to be doing a majority of the setup for my PFSense box using my Mac. The PFSense box will have a DB9 serial connector which is what will be used for most of the initial setup. In order to get it going, I will need the following:

• minicom installed (I'm sure you can use something else, but I'm going with this)
• usb <-> db9 connector
• null modem cable

If you've been doing a lot of system administration work, you may already have MacPorts setup. If not, then get that installed. Once you do have it installed, it should be as simple as:

sudo port install minicom

This will take a while as it also has to download/compile/install perl.

For the hardware installation, I ordered the following from Amazon:

• TRENDnet USB to Serial Converter TU-S9
• Tripp Lite P450-006 Null Modem Gold Cable DB9F/F - 6ft

Once everything is connected up, I should be able to connect up to the PFSense box with just the following command:

minicom -b 9600

EDIT: It appears that with newer versions of OS X, a different driver is required to get the TRENDnet USB to Serial Converter TU-S9 working correctly. A driver from Prolific Technology for the PL-2303 is required. It can be downloaded at:

http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=229&pcid=41